Advertisement
7. TIMER OFF Button
Press this button to initiate the auto-off time sequence. Each press will increase
the auto-timed setting in 30 minutes increments. When the setting time displays
10, each press will increase the auto-timed setting 60 minutes increments.
To cancel the auto-timed program, simply adjust the auto-off time to 0.0
8. DIRECT Button
Used to change the louver movement and set the desired up/down air flow direction.
The louver changes 6
9. SWING Button
Pressing the button less than 2 seconds to activate the horizontal louver swing up
and down automatically.Pressing the button long to activate the vertical louver
swing left and right automatically.
NOTE: The left and right swinging of vertical louver function is only for some models .
10. SHORTCUT Button
• Used to restore the current settings or resume previous settings.
• On the first time connecting to the power, if push the SHORTCUT button, the unit
will operate on AUTO mode, 26
• Push this button when remote controller is on, the system will automatically revert
back to the previous settings including operating mode, setting temperature, fan
speed level and sleep feature(if activated). And transmit the signals to the unit.
• If push this button when remote controller is off, the system will only resume the
previous settings and will not transmit the signals to the unit. And the sleep
feature is disable.
• If pushing more than 2 seconds, the system will automatically restore the current
operation settings including operating mode, setting temperature, fan speed level
and sleep feature(if activated ).
O
in angle for each press.
O
C, and fan speed is Auto.
5
Advertisement
Chapters
