Bose SoundLink Color II Troubleshooting Manual page 9


SoundLink Revolve+ Bluetooth® speaker

SoundLink Micro Bluetooth® speaker
To select the audio output device on a computer running the Windows Vista® operating system,
follow these steps:

Click the "Start" button in the lower left-hand corner of the screen

Click "Control Panel"

In the Control Panel, click "Hardware and Sound"

In the Hardware and Sound menu, click "Manage audio devices"

In the "Playback" tab, highlight the Bluetooth® device

Once the Bluetooth® device is selected, click "Set Default"

If you made any changes, click "Apply", and then click "OK" to close the window
Stereo and Party mode
Applies to:

SoundLink Micro Bluetooth® speaker
You can pair your Bose speakers together to play in the following modes using the Bose®
Connect app (recommended) or the speakers' control buttons:

Party mode (left and right speakers in unison)

Stereo mode (left speaker and right speaker separate)
Refer to your Bose owner's guide to determine if your secondary speaker supports these modes.
Using Party and Stereo mode with the Bose® Connect app
Turn both speakers on.
Make sure at least one speaker is paired with your mobile device.
From the Connect app, select the Party mode icon at the bottom of your screen.
Select, "CONTINUE".
Wait for the speakers to connect. Once connected, you will be in Party mode.
Select, "STEREO (L/R)" to switch to Stereo mode.
Select, "STEREO (L/R)" again to switch back to Party mode.