Advertisement
Please read and keep all safety and use instructions.
Important Safety Instructions
WARNINGS/CAUTIONS
This symbol means there are important operating and maintenance instructions in this guide.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Changes or modifications not expressly approved by Bose Corporation could void the user's authority to operate this equipment.
This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
This device complies with FCC and Industry Canada radiation exposure limits set forth for general population. It must not be co-located or be operating in conjunction with any other antennas or transmitters.
This equipment should be installed and operated with a minimum distance of 8 inches (20 cm) between radiator and your body.
Meets IDA Requirements.
CAN ICES-3 (B)/NMB-3(B)
Management Regulation for Low-power Radio-frequency Devices
Article XII
According to "Management Regulation for Low-power Radio-frequency Devices" without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices.
Article XIV
The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications operated in compliance with the Telecommunications Act.
The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.
DON'T attempt to remove the rechargeable lithium-ion battery from this product. Contact your local Bose retailer or other qualified professional for removal.
Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and all other EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance
Please dispose of used batteries properly, following local regulations. Do not incinerate.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
Names and Contents of Toxic or Hazardous Substances or Elements | ||||||
Toxic or Hazardous Substances and Elements | ||||||
Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent (CR(VI)) | Polybrominated Biphenyl (PBB) | Polybrominated diphenylether (PBDE) |
PCBs | X | O | O | O | O | O |
Metal Parts | X | O | O | O | O | O |
Plastic Parts | O | O | O | O | O | O |
Speakers | X | O | O | O | O | O |
Cables | X | O | O | O | O | O |
This table is prepared in accordance with the provisions of SJ/T 11364. O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T 26572. | ||||||
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T 26572. |
Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; "6" is 2006 or 2016.
China Importer: Bose Electronics (Shanghai) C ompany Limited, Part C, Plan 9, No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone
EU Importer: Bose GP, Castleblayney Road, Carrickmacross, County Monaghan, Ireland
Taiwan Importer: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road, Taipei City 104, Taiwan. Phone Number: 886 2 2514 7977.
Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000 México, D.F. Phone Number: 001 800 900 2673
Apple, the Apple logo, and Siri are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Android, Google Play and the Google Play logo are trademarks of Google Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license.
Google Now is a trademark of Google, Inc.
The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.
Siri is a trademark of Apple Inc., registered in the U.S. and other countries.
©2016 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise used without prior written permission.
Download Bose® Connect to easily manage Bluetooth® connections, unlock features and access future updates.
Carefully unpack the carton and confirm that the following parts are included:
SoundLink Color Bluetooth® speaker II
USB charging cable
If part of the speaker is damaged, do not use it. Contact your authorized Bose® dealer or Bose customer service. Refer to the contact sheet in the carton.
Stand your speaker on its base. Standing your speaker on any other side may cause damage to your speaker and affect sound quality.
Your speaker ships with a partial charge. Before using your speaker for the first time, connect it to a USB wall charger or computer that is powered on. Your speaker does not need to be fully charged, but it does require the initial connection to activate the battery.
Note: Use a 1000 mA power source for the best speaker charging experience. Using a power source with less than 1000 mA may result in a slower charging time or your speaker may not be able to charge while playing audio.
On the button pad, press the Power button .
The button pad enables you to power on your speaker and control your speaker's playback, volume and speakerphone.
Note: Certain mobile devices may not support these functions.
This button controls music sources and speakerphone calls on your mobile device from your speaker.
Play | Press . |
Pause | Press . Note: In Input mode, pressing mutes the audio. |
Skip forward to the next track | Press twice. |
Skip backward to the previous track | Press three times. |
Make a call | Press and hold to access voice control on your mobile device. | |
Switch a call from speakerphone to your mobile device, while on a call | Press and hold . | |
Answer a call | Press . | |
Reject a call | Press and hold . | |
End a call | Press . | |
Mute a call | Press and hold + and – simultaneously. Press and hold again to unmute. | |
Switch between calls | While on a call, press to answer a second call. Press twice to switch between the calls. |
The speaker microphone acts as an extension of the microphone in your smartphone. Using the Multi-function button , you can access the voice control capabilities on your mobile device to make/take calls or ask Siri® or Google Now™ to play music, tell you the weather, give you the score of a game, and more.
Press and hold to access voice control on your mobile device.
Your speaker identifies incoming callers (when applicable). To disable this feature, see "Disabling voice prompts".
Voice prompts guide you through the Bluetooth® pairing and connecting processes.
To check for additional languages
Visit: global.Bose.com/Support/SLCII
You can also use the Bose Connect app.
If your language preference is not available, see "Disabling voice prompts."
Press and hold + and – simultaneously until you hear "Voice prompts off."
Note: Repeat to re-enable voice prompts.
Bluetooth® wireless technology lets you stream music from Bluetooth smartphones, tablets, computers or other devices to your speaker. Before you can stream music from a mobile device, you must pair the device with your speaker.
You can pair your mobile device with your speaker using Bluetooth wireless technology or Near Field Communication (NFC).
You can also use the Bose Connect app to pair your mobile device.
What is NFC?
NFC is a technology that enables mobile devices to establish wireless communication with each other by simply tapping the mobile devices together. Refer to your mobile device owner's guide to see if your model supports NFC.
If your mobile device does not support Bluetooth pairing via NFC or if you are unsure: | Follow the instructions for "Pairing your mobile device". |
If your mobile device supports Bluetooth pairing using NFC: | Follow the instructions for "Pairing a mobile device with NFC". |
Note: If your mobile device supports Bluetooth pairing via NFC, you can use either pairing method.
When you power your speaker on for the first time, the speaker automatically searches for your mobile device.
You can store up to eight paired mobile devices in the speaker pairing list.
When powered on, your speaker tries to reconnect with the two most recently connected mobile devices.
Note: The mobile devices must be within range and powered on.
If your mobile device supports pairing via NFC, tap the NFC touchpoint on your mobile device to the top of your speaker.
You can store up to eight paired mobile devices in the speaker pairing list and your speaker can be actively connected to two mobile devices at a time.
Note: You can only play audio from one mobile device at a time.
Press to hear which mobile devices are currently connected.
You can also easily manage multiple connected mobile devices using the Bose Connect app.
You can connect the audio output of a smartphone, tablet, computer or other type of mobile device to the speaker's AUX connector.
The AUX connector accepts a 3.5 mm stereo cable plug (not provided).
When your speaker is unplugged and unused for more than three days with a remaining charge of less than 10 percent, it enters battery protection mode to preserve battery power. To reactivate your speaker, connect it to a USB wall charger or computer that is powered on.
When not in use, store your speaker in a cool place.
Note: Do not store your speaker for extended periods when fully charged or when the battery indicator blinks red.
Your speaker powers off after 30 minutes of inactivity (no sound coming from your speaker) while operating on battery power.
The top of the system has a series of indicators that glow according to system state.
Shows the battery charge level. Each time you power on your speaker, the battery indicator displays the battery charge level for two seconds and a voice prompt announces the battery charge level.
To check the battery charge level, press and hold while checking the battery indicator.
Note: Battery performance varies with the content played and the volume level at which it is played. In typical use, the speaker battery lasts up to eight hours.
Indicator activity | System State |
Solid green | Charged / medium to full charge |
Blinking amber | Charging |
Solid amber | Medium charge |
Blinking red | Need to charge |
Shows the connection status of a mobile device.
Indicator activity | System state |
Blinking blue | Ready to pair |
Blinking white | Connecting |
Solid white | Connected |
Shows the connection status of a mobile device connected with an AUX cable.
Indicator activity | System state |
Solid white | System is ready to play content from a device |
For more information on using a cable to connect a mobile device, see Using a cable to connect a mobile device.
For additional help, contact Bose customer service. Refer to the contact sheet in the carton.
Your speaker is covered by a limited warranty. Details of the limited warranty are provided on the warranty card in the carton. Please refer to the warranty card for instructions on how to register. Failure to register will not affect your limited warranty rights.
The warranty information provided with this product does not apply in Australia or New Zealand. See our website at www.bose.com.au/warranty or www.bose.co.nz/warranty for details of the Australia and New Zealand warranty.
Input Voltage: 5V ⎓
Input Current: 1A
If you experience problems with your Bluetooth® speaker:
If you could not resolve your issue, see the table below to identify symptoms and solutions to common problems. If you are unable to resolve your issue, contact Bose® customer service.
The following table lists symptoms and possible solutions to common problems.
Problem | What to do |
Battery won't charge |
|
No power (battery) |
|
Speaker won't pair with mobile device |
|
Speaker won't pair with NFC |
|
No sound |
|
No sound from a cabled mobile device |
|
Poor sound quality |
|
Poor sound quality from a cabled mobile device |
|
Audio plays from the wrong mobile device (when two mobile devices are connected) |
|
Speaker powers off |
|
Factory reset clears paired devices and language settings from your speaker and returns it to original factory settings.
global. Bose.com/Support/SLCII
©2016 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
AM747473 Rev. 01
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the SOUNDLINK COLOR II that isn't answered in the manual? Leave your question here.