Bose SoundLink Color II Troubleshooting Manual page 6
Hide thumbs
Also See for SoundLink Color II:
- User manual ,
- Owner's manual (32 pages) ,
- Troubleshooting (4 pages)
Advertisement
To identify and switch between connected devices:
Press the Bluetooth® button to hear which devices are currently connected
Pause audio on your first device to switch to the second device
Play audio on your second device
To disconnect a device:
Turn off the Bluetooth feature on your device
To reconnect a device:
When powered on, your speaker tries to reconnect with the two most recently connected devices.
The devices must be within range (9 m or 30 ft) and powered on.
Selecting the audio output device on a PC
running Windows® XP
Applies to:
SoundLink Colour Bluetooth® speaker
SoundLink Color Bluetooth® speaker II
SoundLink Revolve Bluetooth® speaker
SoundLink Revolve+ Bluetooth® speaker
SoundLink Micro Bluetooth® speaker
To select the audio output device on a computer running the Windows® XP operating system,
follow these steps:
Click the "Start" button in the lower left-hand corner of the screen
Click the Windows "Control Panel"
Advertisement
Need help?
Do you have a question about the SoundLink Color II and is the answer not in the manual?
Questions and answers
bose souncolor II is dead, i succsesfully updated but still no led light after holdinging the on/off button for 10 to 15 seconds
The Bose SoundLink Color II may not be turning on after a successful update if the battery has discharged too deeply. The update is intended to fix an issue where the speaker does not turn back on after deep discharge. If the speaker is still not turning on, ensure it is properly connected to a power source and allow it to charge for some time before attempting to turn it on again.
This answer is automatically generated
Unable to link SoundlinkColour II to Spotify Premium Battery on speakers fully charged