If there is a ilter in the water
Descale required!
for 3 seconds and then press the
ton (10). The descali n g programme wi l l start.
To descale the appli a nce before bei n g
prompted, press the
at least 3 seconds. Then press the
button (13) briely twice. Turn the upper
Empty drip tray
Insert drip tray
●
If the water ilter is activated, the
display will prompt you to remove the ilter
Remove the ilter now if you have not
Fill descaler
Press start
●
●
Place container
Press start
●
●
j button (13)
start but -
e off / j button (13) for
e off / j
Start descaling
Descale in progress
Clean / Fill water tank
Press Start
● Rinse the water tank (17) and reill it with
●
Descale in progress
Empty drip tray
Insert drip tray
●
Replace the ilter if one is being used. The
contain salts. Salts can cause rust ilm