Leep Time Setting Button Timeout Setting - IDTECH ValueScan III User Manual

Likewise, to add a specific barcode with a prefix
code, all Code 128 codes are needed before the
letter A; there are two ways to do so::
To accumulate, use 0218A.
5.3. Sleep time setting / button timeout
setting
1. Sleep time setting code: 0310nnn
If X seconds of sleep is required and calculated
in hexadecimal (4 for base), the formula is
x/4=NNN.
For example, if it takes 60 seconds to
automatically shut down, the setting code is
0310015.
If it takes five minutes to automatically shut
down, the setting code is 0310015.
Sleep time limit: 42 minutes and 47 seconds.
2. Button timeout setting code: 0235nn
If the button timeout is 4 seconds, the setting
code is 023540.
55