IDTECH ValueScan III User Manual page 52

Disable GS1 Omni-directional
(default)
GS1 Omni ID as j
Enable GS1 Limited
Disable GS1 Limited (default)
GS1 Limited ID as k
Note: The setting code type is code128. When
generating a barcode, you must add ^3 before the
barcode; for example: ^3+****** (required barcode).
The ASCll codes in this table are all decimal. For the
hexadecimal, please refer to ASCII Table
52
01670
0168j
01771
01770
0178k
2.