Starting / Stopping The Engine - Stihl BG 56 Instruction Manual

Open the filler cap.
N
Fill up with fuel
N
Closing the cap
N
WARNING
After fueling, tighten down the filler cap
as securely as possible.
Changing the fuel pickup body
Change the fuel pick up body every
year.
Drain the fuel tank.
N
Use a hook to pull the fuel pickup
N
body out of the tank and take it off
the hose.
Push the new pickup body into the
N
hose.
Place the pickup body in the tank.
N
BG 56, BG 56 C, BG 66, BG 66 C, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C
Starting / Stopping the
Engine
Starting the Engine
Observe safety precautions.
N
1
Press the manual fuel pump
N
bulb (1) at least five times – even if
the bulb is filled with fuel.
Adjusting the setting lever
Only on BG 66 C, BG 86, SH 86
To start, move the setting lever to
N
the run position F
3
The setting lever (2) allows the throttle
trigger (3) to be locked in any required
position during operation.
Adjusting the choke knob
If the engine is cold
Turn the choke knob to g
N
If the engine is warm
Turn the choke knob to <
N
Also use this setting if the engine has
been running but is still cold.
English
13