Only use parts and accessories that are explicitly STIHL's philosophy is to continually improve all approved for this power tool by STIHL or are of its products. For this reason we may modify technically identical. If you have any questions in the design, engineering and appearance of our this respect, consult your dealer.
Page 3
2 Safety Precautions and Working Techniques English STIHL recommends the use of original STIHL WARNING parts and accessories. They are specifically designed to match the product and meet your To reduce the risk of eye injuries, performance requirements. wear close-fitting safety glasses in...
Page 4
Proceed with – If either the blower wheel or blower housing is caution, do not put others in danger. damaged, consult your dealer – STIHL recom‐ When blow-sweeping (in open terrain and in gar‐ mends you contact a STIHL servicing dealer dens), look out for small animals to prevent –...
Page 5
WARNING formed by a servicing dealer. Operate the machine only with the blower tube STIHL recommends that you have servicing and completely mounted – risk of injury! repair work carried out exclusively by an author‐ ized STIHL servicing dealer. STIHL dealers are 2.11...
Check the fuel filler cap for leaks at regular inter‐ vals. Use only a spark plug of the type approved by STIHL and make sure it is in good condition – see "Specifications". Inspect the ignition lead (insulation in good con‐...
4.2.2 Engine oil Fueling If you mix the fuel yourself, use only STIHL two- stroke engine oil or another high-performance engine oil classified as JASO FB, JASO FC, JASO FD, ISO-L-EGB, ISO-L-EGC or ISO-L- EGD.
► Position the machine so that the tank cap If the engine is cold faces up. STIHL recommends you use the STIHL filler noz‐ zle for fuel (special accessory). Filling Up with Fuel Take care not to spill fuel while fueling and do not overfill the tank.
7 Cleaning the Air Filter English ► Make sure you have a firm footing: Hold the ► Press the fuel pump bulb at least five times – unit firmly with your left hand on the housing even if the bulb is already filled with fuel. and press down.
English 8 Adjusting the Carburetor Standard Setting ► Take the filter (3) out of the filter housing (4). ► Install a new filter. Temporary measure: wash ► Turn high speed screw (H) counterclockwise the filter. as far as stop (no more than 3/4 turn). ►...
► Fit a new spark plug after about 100 operating hours – or sooner if the electrodes are badly eroded. Install only suppressed spark plugs of the type approved by STIHL – see "Specifica‐ tions". Removing the Spark Plug 8.4.1 Engine stops while idling ►...
Have the muffler checked for contamination (car‐ bonization) by your servicing dealer. STIHL recommends that you have servicing and repair work carried out exclusively by an author‐ ized STIHL servicing dealer. 11 Storing the Machine WARNING If out of use for periods of about 30 days or lon‐...
The K‑factor in accordance with Directive 14.1 Engine 2006/42/EC is 2.0 dB(A) for the sound pressure level and sound power level; the K‑factor in STIHL single cylinder two-stroke engine accordance with Directive 2006/42/EC is Displacement: 27.2 cc 2.0 m/s for the vibration level.
English 16 Disposal 14.10 REACH REACH is an EC regulation and stands for the Contact the local authorities or your STIHL serv‐ Registration, Evaluation, Authorization and icing dealer for information on disposal. Restriction of Chemical substances. Improper disposal can be harmful to health and For information on compliance with the REACH pollute the environment.
Page 16
English 17 EC Declaration of Conformity Technical documents deposited at: ANDREAS STIHL AG & Co. KG Produktzulassung The year of manufacture and serial number are applied to the product. Done at Waiblingen, 09.07.2020 ANDREAS STIHL AG & Co. KG Dr. Jürgen Hoffmann Director Product Certification &...
Page 17
17 EC Declaration of Conformity English 0458-425-0121-D...
Page 18
English 17 EC Declaration of Conformity 0458-425-0121-D...
Page 19
17 EC Declaration of Conformity English 0458-425-0121-D...