Basic Pen Operations - Wacom Cintiq DTZ-1200W Installation Manual

BASIC PEN OPERATIONS

Pointing and selecting: Move the pen slightly above the Cintiq display screen to
position the screen cursor; you do not need to touch the tablet surface. The cursor
jumps to the location where you place the pen. Press the pen tip on the display
screen to make a selection.
Note: You must calibrate the pen display tablet to correctly align the screen cursor with the
pen tip. (See Calibrating Cintiq on page 29.) If the screen cursor does not jump to a position
close to the pen tip when you place the pen on the display screen, then the pen tablet driver
may not be installed or is not loading. Install the pen tablet driver software if necessary.
Otherwise, see Troubleshooting, beginning on page 36.
Clicking: Tap the display screen once with the pen tip, or touch the pen to the
display screen with enough pressure to register a click.
Windows tip: You can make navigating with the pen easier by configuring Windows to select
when the pen is over an icon and to launch the icon with a single click. To turn on this feature
first open a folder.
For Windows Vista, from the O
O
PTIONS
For other Windows versions, from the T
From the G
Dragging: Select an object, then slide the pen tip across the display screen to move
the object.
RGANIZE
. From the G tab select S
ENERAL
tab select S
ENERAL INGLE
Double-clicking: Press the upper side switch, or quickly tap the display
screen twice in the same place with the pen tip. Double-clicking is
easier when the pen is perpendicular to the tablet screen. See the
electronic Software User's Manual for information on fine-tuning the
double-click area.
pull-down menu choose F
-
INGLE CLICK TO OPEN AN ITEM
pull-down menu choose F
OOLS
- (
CLICK TO OPEN AN ITEM POINT TO SELECT
S
OLDER AND EARCH
( ).
POINT TO SELECT
O ....
OLDER PTIONS
).
Working with your Cintiq
Page 19