Model Designation; Specifications; Plug Configurations; Electrical Rating Chart - Hatco THERMO-FINISHER TFWM Series Installation And Operating Manual

Thermo-finisher
Wall Mounted

Plug Configurations

Some units are supplied from the factory with an electrical cord
and plug installed. Plugs are supplied according to the
application.
WARNING
ELECTRIC SHOCK HAzARD:
• Plug unit into a properly grounded electrical receptacle
of the correct voltage, size, and plug configuration. If
plug and receptacle do not match, contact a qualified
electrician to determine and install the proper voltage
and size electrical receptacle.
• Units supplied without an electrical cord and plug
require a hardwired connection to the on-site electrical
system. Connection must be properly grounded and of
the correct voltage, size, and configuration for the
electrical specifications of the unit. Contact a qualified
electrician to determine and install the proper electrical
connection.

Electrical Rating Chart

Model Volts
TFWM-3900 208
208
240
240
TFWM-3939 208
240
Form No. TFWMM-0810
T F W M - 3 9 X X
Figure 3. Model Designation
Phase Watts Amps
1 7200 34.6
3 7200 20.0
1 7500 31.3
3 7500 18.0
3 14400 40.0
3 15000 36.1

MODEL DESIGNATION

Size of Lower Heating Elements
(diameter in inches)
Quantity of Lower Heating Elements
Size of Upper Heating Elements
(diameter in inches)
Quantity of Upper Heating Elements
NEMA L15-30P
Figure 4. Plug Configurations
NOTE: Receptacle not supplied by Hatco.
NOTE: Specification label located on the side of the unit. See
label for serial number and verification of unit electrical
information.
Plug Configurations
NEMA 6-50P or Hardwired
NEMA L15-30P or Hardwired
NEMA 6-50P or Hardwired
NEMA L15-30P or Hardwired
Hardwired
Hardwired
5

SPECIFICATIONS

NEMA 6-50P
Shipping Weight
166 lbs. (75 kg)
166 lbs. (75 kg)
166 lbs. (75 kg)
166 lbs. (75 kg)
181 lbs. (82 kg)
181 lbs. (82 kg)