Model Description - Hatco THERMO-FINISHER TFWM Series Installation And Operating Manual

IMPORTANT SAFETy INFORMATION
NOTICE
This unit is designed and recommended for use on metallic
countertops. Damage to non-metallic countertop material
is not covered under the Hatco warranty.
Use non-abrasive cleaners on glass and metal surfaces.
Abrasive cleaners could scratch the finish of the unit,
marring its appearance and making it susceptible to soil
accumulation.

MODEL DESCRIPTION

All Models
Thermo-Finisher wall mounted food finishers have an easy-to-
®
clean interior constructed of stainless steel. The units feature
plate/tray activated, quick-heating infrared ribbon heating
elements, three individually-controlled heating bays, and
adjustable shelves. The stainless steel bay dividers are
removable to allow the use of larger pans across two heating
bays. Controls include a main POWER ON/OFF (I/O) switch,
individual HEAT CONTROL knobs for each ribbon heating
element, and POWER ON indicator lights for each heating bay.
The end panels and rear panel are available in several
Designer colors.
Accessory countertop conversion kits are available to add legs
to the unit for countertop installations. Refer to the OPTIONS
AND ACCESSORIES section for details.
Model TFWM-3900
Model TFWM-3900 offers top heating only. It features three
upper ribbon heating elements—one above each heating bay.
The TFWM-3900 is available with a 6' (1829 mm) power cord
and plug or as a hardwired unit.
Power Cord and Plug
POWER ON/OFF
(I/0) Switch
Adjustable
Shelf
Figure 1. Model TFWM-3900
TOP HEAT
CONTROL
POWER ON
Knob
Indicator Light
Removable
Bay Divider
This unit is intended for commercial use only — NOT for
household use.
Clean unit daily to avoid malfunctions and maintain
sanitary operation.
Do not lay unit on the side with the control panel or damage
to unit could occur.
Model TFWM-3939
Model TFWM-3939 offers top and bottom heating. It features
three upper ribbon heating elements and three lower ribbon
heating elements—an upper and lower element in each heating
bay. Heavy duty, tempered glass covers the lower ribbon
heating elements. The TFWM-3939 is available as a hardwired
unit only.
POWER ON/OFF
(I/0) Switch
Hardwired
Power
Connection
Ribbon
Heating
Adjustable
Element
Figure 2. Model TFWM-3939
4
NOTICE
BOTTOM HEAT
TOP HEAT
CONTROL
CONTROL
Knob
Knob
POWER ON
Indicator Light
Removable
Bay Divider
Shelf
Form No. TFWMM-0810