Charging The Battery Pack - Toro Flex-Force Power System Operator's Manual

1. Speed range switch
2. Lockout trigger
Shutting Off the Trimmer
To shut off the trimmer, release both triggers.
Whenever you are not using the trimmer or are
transporting the trimmer to or from the work area,
remove the battery pack.
Removing the Battery Pack
from the Trimmer
Press the battery latch to release the battery pack and
slide the battery pack out of the machine
1. Battery latch
Figure 6
3. Variable-speed trigger
(Figure
Figure 7

Charging the Battery Pack

Important:
The battery pack is not fully charged
when you purchase it. Before using the tool for
the first time, place the battery pack in the charger
and charge it until the LED display indicates the
battery pack is fully charged. Read all safety
precautions.
g268420
Important:
Charge the battery pack only in
temperatures that are within the appropriate
range; refer to
Note:
At any time, press the battery-charge-indicator
button on the battery pack to display the current
charge (LED indicators).
1. Make sure that the vents on the battery and
battery charger are clear of any dust and debris.
7).
1. Battery pack cavity
2. Battery pack venting areas 6. Handle
3. Battery pack terminals
g268419
4. Battery-charge-indicator
button
2. Line up the cavity in the battery pack
with the tongue on the charger.
3. Slide the battery pack into the charger until it is
fully seated
4. To remove the battery pack, slide the battery
backward out of the charger.
5. Refer to the following table to interpret the LED
indicator light on the battery charger.
Indicator Indicates
light
Off No battery pack inserted
Battery pack is charging
Green
blinking
Green Battery pack is charged
11
Specifications (page
Figure 8
5. LED indicators (current
charge)
7. Charger LED indicator
light
8. Charger venting areas
(Figure 8).
10).
g290533
(Figure 8)