Inhouse:reg_Enable - VXI VM4016 User Manual

www.vxitech.com
Purpose
Type
Command Syntax
Command Parameters
*RST Value
Query Syntax
Query Parameters
Query Response
Description
Examples
Related Commands
VM4016 Command Dictionary

INHOUSE:REG_ENABLE

Controls the masking of REGINT
Setting
INHOUSE:REG_ENABLE <boolean>
<boolean> = 0 | 1 | OFF | ON
0
INHOUSE:REG_ENABLE?
N/A
ASCII numeric 0 or 1
REG_ENABLE controls the masking of REGINT. If REG_ENABLE is zero, then no
backplane interrupt can be generated. If REG_ENABLE is a non-zero number, then a
backplane interrupt can be generated. If PSEUDO is set to on, then a write to the
register at offset 0x38 also controls the masking - zero disables, a non-zero enables.
This command is included for completeness. Enable/disable capabilities are provided in
the pseudo register interface to allow a complete register interface. This command just
provides that same capability in the word serial interface.
Note: All letters of the command are required; there is no short form of the command.
Command / Query
INHOUSE:REG_ENABLE 1
INHOUSE:REG_ENABLE?
INHOUSE:PSEUDO
INHOUSE:REGINT
Response (Description)
1
71