Input:mask:interrupt - VXI VM4016 User Manual

INPUT:MASK:INTERRUPT

The INPut:MASK:INTerrupt command enables or disables interrupt generation when changing
MASK values. When set to 0 (the *RST state), interrupts are temporarily disabled whenever
MASK values are changed. When set to 1, interrupts are generated even as MASK values are
changed.
INPut:MASK:INTerrupt <boolean>
EXAMPLES
INPut:MASK:INT 0
INPut:MASK:INT?
0
28
VXI Technology, Inc.
Where <boolean> is 0 | OFF | 1 | ON.
Disables interrupt generation
Reports that interrupt generation is disabled
VM4016 Programming