Table of Contents
Advertisement
www.vxitech.com
INPUT:MASK
The INPut:MASK command enables or disables input channels from generating interrupts or
recording data in the conditional register. If a channel is programmed to be ON or 1, then it is
enabled to generate interrupts. If a channel is programmed to be OFF or 0, then it cannot generate
VXIbus interrupts.
INPut:MASK <state>, <channel_list>
EXAMPLES
INPut:MASK ON,(@1:8)
INPut:MASK? 3
1
INP:MASK? 9
0
VM4016 Programming
Where <state> is 0 | OFF | 1 | ON.
Where <channel_list> is standard channel
list format supporting channels 1 through
16.
Enables channels 1 through 8 to generate
interrupts.
Reports that channel 3 is enabled for
voltage comparison.
Reports that channel 9 is not enabled for
voltage comparison.
27
Advertisement
Table of Contents
