Table of Contents
Advertisement
Available languages
Available languages
Ambient air temperature range:
-
-
Relative humidity:
-
-
The ambient air must be free from dust, acids, corrosive gases or substances, etc.
Can be used at altitudes up to 2000 m (6561 ft. 8.16 in.)
Obligations of the
The operator must only allow persons to work with the LaserHybrid head who:
operator
-
-
-
Checks must be carried out at regular intervals to ensure that operators are working in a
safety-conscious manner.
Obligations of
Before starting work, all persons using the LaserHybrid head undertake:
personnel
-
-
Before leaving the workplace, ensure that people or property cannot come to any harm in
your absence.
Personal protec-
For your personal safety, take the following precautions:
tive equipment
Persons in the closed cell for the LaserHybrid process must:
-
-
-
-
-
If other persons are in the closed cell for the LaserHybrid process, you must:
-
-
-
Danger from toxic
The fumes produced during welding contain harmful gases and vapours.
gases and va-
Welding fumes contain substances that may, under certain circumstances, cause birth de-
pours
fects or cancer.
62
during operation: -10 °C to + 40 °C (14 °F to 104 °F)
during transport and storage: -25 °C to + 55 °C (-13 °F to 131 °F)
up to 50% at 40 °C (104 °F)
up to 90% at 20 °C (68 °F)
are familiar with the fundamental instructions regarding safety at work and accident
prevention and have been instructed in how to use the LaserHybrid head
have read and understood these operating instructions, especially the "Safety rules"
section, and have confirmed as much with their signatures
are trained to produce the required results.
to observe the basic instructions regarding safety at work and accident prevention
to read these operating instructions, especially the "Safety rules" section and sign to
confirm that they have understood them and will follow them.
wear solid footwear that provides insulation even in wet conditions
protect their hands by wearing suitable gloves (electrically insulated and heat-proof)
protect their eyes from laser beams by wearing regulation-compliant laser safety gog-
gles. In addition, they must protect their faces and eyes from UV rays using a protec-
tive visor and regulation filter element for laser protection class 4 worn in front of the
laser safety goggles and the face. Even when using this regulation filter element for
laser protection class 4, they should not look into the laser beam.
only wear suitable (i.e. flame-retardant) clothing
use ear protectors to protect them from the cross-jet noise (120 dbA)
make them aware of all the dangers that may occur during operation (e.g. risk of a
build-up of gases that are detrimental to health, possible risk of suffocation due to lack
of oxygen in the air, danger from laser light, etc.)
provide them with protective equipment
erect safety screens or curtains
Advertisement
Chapters
Table of Contents
