Storage; Troubleshooting; Disposal - Silvercrest SPW 1000 A1 Operating Instructions Manual

Hide thumbs Also See for SPW 1000 A1:
Table of Contents

Advertisement

Available languages

Available languages

Attention! Appliance Damage!
Do not use abrasive cleaners or scouring pads, if
you do, the anti-stick coating on the Wok pans 6
and the cooking plate 1 will be scratched and
become unusable!
When you have removed the power cable 3 of the
Party Wok from the mains power socket, and the Wok
pans 6 and the cooking plate 1 have cooled down ...
1. Using the plastic spatulas 4, remove all remai-
ning food residues from the Wok pans 6.
2. Thoroughly rinse the wok pans 6, sauce bowls
2, plastic spatula, 4, wooden spatula 7, and
the ladle 5 in warm water containing a mild
dishwashing detergent. Do not use abrasive cle-
aners or metal sponges, otherwise the nonstick
coating on the wok pans 6 could be scratched
and rendered unusable.
3. Rinse the detergent residues off with clear water.
4. Clean the hotplate 1 with a moist sponge.
5. Ensure that all parts are completely dry before
you take the party wok back into use.

Storage

• Remove the power cable 3 from both the wall
socket and the cooking plate 1 when the appliance
is not being used.
• Allow the Party Wok and its components to cool
down completely before storing them away.
• Wrap the power cable 3 around the cable
retainers on the underside of the appliance.
• For the sake of safety, always store the Party
Wok out of the reach of children.

Troubleshooting

Should the Party Wok not function or not function
correctly...
1. Check to ensure that the power cable 3 is correctly
connected to the cooking plate 1.
2. Check to ensure that the power cable 3 is correctly
connected to the wall socket.
3. Check to see if the mains power socket to which
the Party Wok is connected is "live", in that another
appliance is connected to it.
If the malfunction cannot be traced back to one of
these causes ...
4. Remove the power cable from the wall socket
and allow the cooking plate 1 to cool down.
5. Re-insert the power cable 3 into a wall power
socket.
Should the malfunction not be corrected by the
measures described above, please make contact
with one of our service-partners in your locality.

Disposal

Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the provisions of European
Directive 2002/96/EC.
Dispose of the appliance through an approved disposal
centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally friendly manner.
- 8 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

76028

Table of Contents