Function; Placement; Before The First Use; Operation - Silvercrest SPW 1000 A1 Operating Instructions Manual

Function

With the Party Wok ...
• you can prepare foods in the traditional
Chinese style with high heat.
• vitamins and nutrients are retained in the food
due to short cooking times and high heat.
• the foods can be prepared without fat or with
very little of it.
• individuals can prepare their own foods to their
own tastes.

Placement

Place the switched-on Party Wok exclusively on level,
firm and heat-resistant surfaces in a dry environment.
Attention!
The avoid the risks of heat influences and fire in the
area adjacent to the switched on Wok, always
ensure that ...
• the switched-on Party Wok is at all times located
at a minimum distance of 50 cm from walls, furniture
and other objects.
• no objects are suspended above the switched-on
Wok (e.g. lamps).
• there are no easily inflammable objects close to
the switched-on Wok (e.g. materials/textiles).
• the power cable 3 and the cooking plate 1
are not located close to hot surfaces or open
flames.
• the power cable 3 does not, and cannot, make
contact with the cooking plate 1.
• no moisture and/or liquids can permeate the
cooking plate 1. Non-compliance heightens the
risk of fire or of receiving an electrical shock!

Before the First Use

Remove all components of the Party Wok from the
packaging. Remove all protective foils that may be
on the appliance and clean all packaging residues
from the parts that will come into contact with food-
stuffs (see Chapter "Cleaning and Care").

Operation

On the first usage, the generation of light smoke
and a slight smell can occur, this is due to production
residues. This is completely normal and is not
dangerous. Provide for sufficient ventilation, for
example, open a window.
1. Insert the sauce dishes 2 into the designated
slots on the sides of the cooking plate 1. Then
fill the sauce dishes with your preferred sauces. 2
2. Insert the power cable 3 into the cooking plate 1.
If the appliance is positioned with the long side
facing the mains power plug, guide the cable
through the clamp.
- 26 -