Quail Digital Pro11 Installation Manual page 3

STEP 2
•
Set up the 6-port battery charger.
Select a clear desk or cabinet top in
the monitoring room close to a power
socket that DOESN'T get switched off
or unplugged at night.
•
Connect the Q-PSU5 power supply
into the back of the charger and
weave the cable around the gates.
(figure 3)
•
Switch on the power. The LED on
the front of the charger will illuminate
GREEN.
• Batteries will last for 16 hours on standby and up to 10 hours in hands-free mode.
Always put headsets back into the charger when not in use.
• Wipe down headsets and charger with hygiene wipes routinely.
• Call your service provider if you have any problems.
(figure 2)
figure 2
figure 3