Advertisement
Bolting the Feet to the Deck
1. Use part number 11 with lock tite
2. Make sure you have chamfered the edge before inserting the foot to the deck. ( if you do not,
you will get gel coat cracking)
3. There is a rubber washer that goes between the base and the deck
4. Use the supplied the backing washer and nylock nuts
5. Get them snug, you will tighten after the tower is complete
Connect Tower Feet to Main Frame
1. Once both rear tower feet are secure go ahead and lift the main frame up.
2. You will use the shoulder bolts part #10 3. We recommend that you insert the shoulder bolt
from the inside of the boat.
3. The frame should be able to move up and down at this point.
Advertisement
