Advertisement
Forward Support
1. 1Start by assembling parts- 7,8,9,10,15,16,17
2. Snap #3 on to the main frame
3. At our shop we have an over head lift, we used this to hold the tower in the "up position"
4. Put #1 and #7 together with part #14
5. It is easier to build the right & left together
6. With you friends help take the assembled front support and clamp it around the tower with
parts #4,& 6
7. By "hanging" the tower you can step back and find the "look" of you tower. You might want to
lower or raise it depending on your boat.
Advertisement
