Summary of Contents for fantastic furniture BINGO Bed Single
Page 1
Assembly Instructions BINGO Bed Single Ver1.2...
Page 2
WA RNI NG WA RN NG FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE THAT IS NOT COVERED BY YOUR WARRANTY Lay out all of the components on a soft surface Read Instructions carefully. as if you were preparing to do a jigsaw puzzle. Check no parts are missing.
What you Need To Assemble the Body 5 x Bed Head&Foot Connect Bar 2 x Bed Head Legs (P1) (P3) 1 x Side Rails (P5) 2 x Bed Foot Legs (P2) 1x Side Rails 1 x Centre Rail (P4) (P7) 1x Side Rails (P4) 1x Support legs...
Page 4
Step 1 You will need 10 x Long Bolts 1 x Allen key (H1) 10 x M6 (P3) (H7) (P3) (P3) (P1) (H7) (H1) (P1) (P3) (P3) (P2) (P2) Insert 10 x Bolts (H1) and 10x Washer (H7) into the holes in Bed Head (P1) and Bed Foot (P2) to connect cross rails P3 using Allen Key provided.
Page 5
Step 3 You will need 4 x Small Bolts 1 x Allen key (H3) (H3) (P7) Attach 4 x Bolts (H3) to connected Side Rails. With the Allen Key provided. Tighten all the Bolts. Step 4 (P8) (P8) (P8) Put 22 x Bed Base Slats on their correct place and then insert them one after one. IMPORTANT: Ensure all Bolts and Hex Nuts are fully tighten.