Operating Procedures; Program Screen - IDEC HG2F-SS22VF Manual

2. Operating Procedures

This application software operates as follows: Register one type of 13-digit barcode data to the operator
interface, an "OK" is displayed on the screen when the data scanned with the barcode reader matches the
Stored Data. Otherwise, "NG" is displayed.
The following are the details of the operating procedure.

2-1 Program screen

-Base Screen 1: Program Screen-
When the power is turned on, the following Program screen is displayed on the HG2F display.
Before activating the HG2F, make sure to connect the HG2F unit to the barcode reader by referring
to the illustration in "1-2 System configurations".
(1) Display area of
registered barcode data
(2) Display area of
scanned barcode data
(5) OK lamp
(1) Display area of registered barcode data
(2) Display area of scanned barcode data
(3) STORE button used for registering barcode data
(4) CLEAR DATA button for clearing the
barcode registration
(5) OK lamp
.......................................................
(6) NG lamp
.......................................................
Displays the registered barcode data.
..............
Displays the scanned barcode data.
.................
Pressing the STORE button allows you to register
..
the scanned barcode data to the display area of
registered barcode data.
Pressing the CLEAR DATA button allows you to
................
clear the data of the barcode that has been
registered for verification.
The OK lamp illuminates when the registered
barcode data matches the scanned barcode data.
The NG lamp illuminates when the registered
barcode data does not match the scanned
barcode data.
(3) STORE button used for
registering barcode data
(4) CLEAR DATA button for
clearing the barcode
registration
(6) NG lamp
4