Creating The Clear Data Button For The Barcode Data - IDEC HG2F-SS22VF Manual

4. Description of the Program

4-4 Creating the CLEAR DATA button for the barcode data

A "Word Button" is available with the operator interface and is used for creating the CLEAR DATA button
for the barcode data. In this example, use the Set function of the Word Button to copy "0" to STORED
DATA.
Storage location LDR8010
Data
Storage location
(1) Select the Word Button from the toolbar. When the Properties of Word Button dialog box is displayed,
click the [Advanced>] button to start the setting.
* The descriptions for the "View" and "Format" settings are omitted in this text. For these descriptions,
refer to the section "Parts" in Chapter 5 "Draw and Parts Objects" in the Instruction Manual.
LDR8011 LDR8012
0 0
LKR 100 LKR 101 LKR 102
LDR8013 LDR8014
0 0 0
Transfers 7-word data.
LKR 103 LKR 104
(2) To use the "Set" function in this
Stored Data
(3) Designate the Value of the
(4) Designate the destination device
(5) To transfer 7 words, set "7" in
(6) Click the [OK] button to complete
LDR8015 LDR8016
0 0
LKR 105 LKR 106
example, set the "Action Mode"
to "Set".
Source Data. Specify "0" here.
to where the data is to be
transferred. Specify "LKR 100"
here.
the Transfer field.
the settings.
15