Using The Results Of Barcode Detections - IDEC HG2F-SS22VF Manual

5. Advanced Program for Barcode Comparison

5-9 Using the results of barcode detections

This section describes how to develop the Advanced Barcode Comparison Application Program to actual
comparative outputs of your PLC. (Make sure that the barcode reader and HG series are connected as
described in "1 System Configurations".)
(1) Configure the User Communication settings up to the condition described in "3. User Communication
settings" (page 7 to 10).
(2) When HG is connected to a PLC, import "Screen 1" of this Advanced Barcode Comparison Application
Program to the project being created on the HG unit.
(3) Add the following programs in order to develop to the output devices of the PLC.
Example: Develop to the PLC output with "Bit Write Command" when the result is "OK".
ON/OFF status of "LM2001" → Turns ON "Q0".
24