Advanced Program For Barcode Comparison; Program Screens - IDEC HG2F-SS22VF Manual

5. Advanced Program for Barcode Comparison

This application program compares the scanned barcode with 50 types of pre-registered barcodes, (up to 20
digits, alphanumeric characters can be used), and then displays "OK" when the data matches or "NG" when
the data does not match. After configuring the barcode protocol using User Communications, import the
Advanced Barcode Comparison Application Program to your screen with the "Import Screens (*)" function. The
screen can be used easily for barcode comparison without creating software for registering barcodes and for
comparison operation.
The following section describes the details of the operating procedures.
* Procedure for using the Import Screens function: Refer to the section "Importing Screens" in Chapter 4
Screen Management of the WindO/I-NV2 Online Manual (Select "Help" from the menu bar).

5-1 Program screens

-Base Screen 1: Program Screen-
When the power is turned on, the following Program screen is displayed on the HG2F display.
Before activating the HG2F, make sure to connect the HG2F unit to the barcode reader by referring
to the illustration in "1-2 System configurations".
(1) Display and entry area
of barcode STORED/
COMPARE DATA
(2) Display area of
scanned barcode data
(6) OK lamp
(1)
Display and entry area of barcode STORED/ COMPARE DATA
...
The registered barcode data can be displayed here. Pressing the display will display the character
keys, allowing you to modify the registered barcode data.
(2) Display area of scanned barcode data
...
Displays the scanned barcode data.
(3)
STORE button used for registering barcode data
...
Pressing the STORE button allows you to register the scanned barcode data to the display area of
the scanned barcode data.
(4)
CORRECT button used for modifying the barcode data
...
Pressing the CORRECT button allows you to modify the data in the display area of the verification
barcode and then register the data again.
(5)
Display and entry area of barcode number STORED/ COMPARE DATA
...
The barcode number to be registered and verified is displayed in this area. Pressing the numeral
will display a numeric keypad, allowing you to enter the barcode number to be registered or
verified.
(6) OK lamp
...
The OK lamp illuminates when the stored barcode data matches the scanned barcode data.
(6) NG lamp
...
The NG lamp illuminates when the stored barcode data does not match the scanned barcode data.
(3) STORE button used for
registering barcode data
(4) CORRECT button
used for modifying the
barcode data
(5) Display and entry area of
barcode number STORED/
COMPARE DATA.
(7) NG lamp
19