System Configurations; Required Hardware And Application Software - IDEC HG2F-SS22VF Manual

1. System Configurations

1-1 Required hardware and application software

Part Name
Operator Interface
Programming Software
Computer Link Cable
User Communication Cable
Barcode Reader
1-2 System configuration
PC
Programming Software
"WindO/I-NV2"
Model: HG9Y-ZSS2W
* When connecting a barcode reader to the HG2F, connect the User Communication cable as shown
below. (Pins No. 2 and No. 6 are open when using the HG3F/4F.)
Barcode Reader (RS-232C)
Pin No.
1
2
3
4
5
7
25
D-sub 25-Pin connector socket type
Model
HG2F-SS22VF
HG9Y-ZSS2W
FC2A-KC4C
FC2A-KP1C
GRYPHON D100
CAB-320
PG5/110V
Computer Link Cable
Model: FC2A-KC4C
GRYPHON Barcode
Reader
Model: GRYPHON D100
RS-232C Interface Cable
Model: CAB-320
Name
Shielded wire
Shield
TXD
RXD
RTS
CTS
GND
+5V
Description
5.7" STN Color LCD Type
HG Series Programming Software
(WindO/I-NV2 Ver. 2.7)
Computer Link Cable 1C, RS232C Cable (3m/9.84ft. long)
User Communication Cable 1C (2.4m/7.87ft. long)
Datalogic's CCD Scanner for 1-D Codes
Datalogic's RS 232C Interface Cable
Datalogic's AC Adapter
Operator Interface
Model: HG2F-SS22VF
User Communication Cable
Model: FC2A-KP1C
Note) The end of this cable is not
terminated. Wire the cable as shown
in the connection diagram.
HG2F (RS-232C)
Name
RS
ER
SD
RD
DR
EN
SG
NC
Mini DIN 8-pin connector socket type
(HG2F/3F/4F)
Connect the mini-DIN8
connector on the rear
face to SERIAL2
(Round pin).
Barcode Reader AC Adapter
Model: PG5/110
Pin No.
1
2
3
4
5
6
7
8
3