General Characteristics - LEGRAND DX3 Manual

STOP & GO automatic resetting STOP & GO automatic resetting STOP & GO automatic resetting STOP & GO automatic resetting

5. GENERAL CHARACTERISTICS

5. GENERAL CHARACTERISTICS 5. GENERAL CHARACTERISTICS 5. GENERAL CHARACTERISTICS
Front side marking: Front side marking: Front side marking: Front side marking:
. By permanent pad printing
Lateral side marking: Lateral side marking:
Lateral side marking: Lateral side marking:
. By laser.
left side
right side
Technical data sheet: F01284EN/00
Alarm contact:
- IEC/EN 60950
- 230V~, 0,2A
- 24 / 48V, 1A
Updated: -
Cat. N°(s) : 4 Cat. N°(s) : 4 062 88 / 89 062 88 / 89
Cat. N°(s) Cat. N°(s) : 4 : 4 062 88 / 89 062 88 / 89
5. GENERAL CHARACTERISTICS 5. GENERAL CHARACTERISTICS 5. GENERAL CHARACTERISTICS 5. GENERAL CHARACTERISTICS
Characteristics of the fault detection: Characteristics of the fault detection: Characteristics of the fault detection: Characteristics of the fault detection:
- Rd (non operating rated resistance between the live parts and the
earth ) 225kΩ
- Rd0 (operating rated resistance between the live parts and the earth)
375kΩ
- Rcc (non operating rated resistance between the live parts)
0,75Ω
- Rcc0 (operating rated resistance between the live parts)
1,25Ω
- The Stop & Go device can be used in TT and TN earth systems
Pulse rated voltage: Pulse rated voltage: Pulse rated voltage: Pulse rated voltage:
. Uimp = 4 kV
Insulation rated voltage: Insulation rated voltage: Insulation rated voltage: Insulation rated voltage:
. Ui = 500 V
Pollution degree Pollution degree : : : : Pollution degree Pollution degree
. 2 according to IEC/EN 60898-1.
Dielectric strength: Die lectric strength:
Die Die lectric strength: lectric strength:
. 2500 V
Mechanical endurance: Mechanical endurance: Mechanical endurance: Mechanical endurance:
. 20000 operations.
Electrical endurance: Electrical endurance: Electrical endurance: Electrical endurance:
. In accordance with the requirements of the standards of the
associated protection device.
Enclosure material: Enclosure material: Enclosure material: Enclosure material:
. 20% glass-fiber reinforced polycarbonate
. Characteristics of this material: self extinguishing, heat and fire
resistant according to EN 60898-1, glow-wire test at 960°C for external
parts made of insulating material necessary to retain in position current-
carrying parts and parts of protective circuit (650°C for all other external
parts made of insulating material).
Average weight per pole: Average weight per pole:
Average weight per pole: Average weight per pole:
. 0.174 kg.
V V V V olume when packed olume when packed : : : :
olume when packed olume when packed
. 1.20 dm .
3
Ambient operating temperature: Ambient operating temperature: Ambient operating temperature: Ambient operating temperature:
. Min. = - 5 °C / Max. = + 60 °C.
Ambient storage temperature: Ambient storage temperature: Ambient storage temperature: Ambient storage temperature:
. Min. = - 25 °C / Max. = + 60 °C.
Protection class: Protection class:
Protection class: Protection class:
. Protection index of terminals against solid and liquid bodies:
IP 20 (according to IEC 529, EN 60529 et NF C 20-010).
. Protection index of the case against solid and liquid bodies:
IP 40 (according to IEC 529, EN 60529 et NF C 20-010).
Created: 11/11/2011
(continued)
4/5