Page 4
Certificates The Kidgoo meets all requirements of the European safety standard for This documentation can be ordered from Qeridoo GmbH in other bicycle trailers EN 15918, as well as the safety requirements of the baby languages, or is available for download on our website if already available.
Qeridoo. If the product is no longer discoloration of covers, are excluded from the warranty. held by Qeridoo, a product of a similar type and quality will be replaced at Qeridoo's option. In case of an exchange, the warranty period Claims under this warranty are only valid if the following warranty does not start again and will not be extended.
INTRODUCTION Proper use Performance limits The Kidgoo was designed as a bicycle trailer and comes with an The Kidgoo can only be safely used if you observe and adhere to the additional buggy and jogger function. For trailer mode, use a tow bar following performance limits in every mode: with coupler to connect the trailer to a suitable towing vehicle (bicycle or motorised pedelec with a maximum speed of 25 km/h).
INTRODUCTION The following additional restrictions apply to trailer mode: Caution! Requirements for the tow bar Kidgoo1 and Kidgoo2 Labels notes referring to the Caution risk level. Indicates possible dangers that can result in material damage if the Permissible tow bar load range 0 – 8 kg instructions are not followed.
6 months old or who cannot sit upright independently, see: The Kidgoo must not be used for commercial or competitive » zubehoer.qeridoo.de. purposes. So that they have sufficient headroom in all situations, the children »...
Install and use only original accessories and spare parts manu- » children are wearing clothes appropriate for the weather conditions factured or recommended by Qeridoo. Using other products re lieves and the cabin’s inside temperature. the manufacturer of liability. Never leave children unsupervised in the Kidgoo and make sure »...
INTRODUCTION Additional weight When fully loaded, the Kidgoo1 weighs up to 50 kg and the Kidgoo2 » weighs up to 60 kg that the bicycle must pull, brake and keep on track in addition to its own weight and that of the rider: –...
Page 11
PRODUCT OVERVIEW Scope of delivery Pennant with 2-part Jogger wheel pennant staff and centre Right fork rod piece Left fork rod Tow bar with coupler and retaining strap 14" pneumatic wheel Push handle with hand Impeller axle with quick strap release Cabin with seats and 5-point safety harnesses...
PRODUCT OVERVIEW PRODUCT OVERVIEW Parts and operating elements Parts and operating elements...
Page 13
PRODUCT OVERVIEW Cabin (frame made from aluminium tubes with weatherproof 20" wheel with push-in axle fabric cover) Coupler bracket with cotter pin fastening and retaining strap for 3-in-1 canopy to protect against insects and splash water with securing the tow bar on the bicycle frame integrated sun screen, rollable Leaf suspension with rubber damper Splash water cover, rollable...
If necessary, follow the QR code to call up a video about assembly » and operation on the internet. You can find our video tutorials on our YouTube channel at » www.youtube.com/user/Qeridoo Danger! Never perform assembly work if there are children in the cabin. Keep children away from the vehicle during assembly.
ASSEMBLY Insert one wheel into the cabin’s axle retainer: » Installing the side rods – Hold the wheel so that you can press your thumb onto the rubber cap on the outside of the wheel hub. – Press on the rubber cap and keep it pressed in order to open the push-in axle fastening.
ASSEMBLY Make sure that the slide rails for the wheel guard are fixed and » Mounting the push handle tightened on both sides. Slide the wheel guard onto the slide rails as shown in the picture. The push handle has multiple height settings and is used for pushing, »...
ASSEMBLY Make sure that the Velcro straps on the sides of the interior which » Danger! connect the side seat cushions to the side wall. Make sure that the push handle is also mounted in trailer mode at each time you drive as shown in the table (see „Setting the mode“...
ASSEMBLY Adjusting the buggy wheel Insert the lower part of the pennant pole with the attached centre » piece into the slot on the left leaf suspension cover. Guide the upper part of the pennant pole through the loop on the »...
ASSEMBLY Keep the button pressed and push the tow bar into the tow bar Mounting the tow bar » holder from the front until the mark. You only require the tow bar in trailer mode. The tow bar is being used to Release the button so that the locking bolt secures the tow bar in »...
Page 20
If it does not fit your bicycle, find a suitable adapter and special couplers in our coupling guide on the following website: www.qeridoo.de/kupplungsleitfaden Caution! Do not use a tool which was previously in contact with conventional steel.
ASSEMBLY Installing the rear light Inserting the impeller axle In trailer mode, a certified rear light must be operated in accordance with the specifications of the German Road Traffic Licensing Regulations (StVZO) in poor visibility or twilight. Move the push handle to the second last upper position above the roof. »...
Loosen the quick release axle of the jogger wheel and pull it » side ways out of the jogging wheel. Stow the jogger wheel in the compartment room of your Qeridoo. » Danger! Align the axle exactly in the center and then fix the axle again by Remove the buggy wheel when using the 14"...
UTILISATION Unscrew the black knurled screw on the brake caliper to increase » Adjusting the disc brake the braking force. Size 4 and 5 hex keys are required. In addition, the outer brake lining can be readjusted using the size 5 »...
UTILISATION freely without grinding or jamming. If necessary, reposition the seat of the brake caliper. 3. Adjusting the braking force on the brake lever (pressure point) On the brake lever, the silver adjusting screw can be used to adjust » the pressure required to grip the brakes.
UTILISATION Operating the parking brake Caution! If the parking brake engages not correctly, the wheels Danger! are not locked and the trailer can roll away. Apply the parking brake to secure the Kidgoo in order to prevent it from rolling away. Also remember to release it Adjusting the push handle in time before you start moving.
UTILISATION Setting the mode Danger! You can use the Kidgoo in one of the following modes: Before every journey, make sure that necessary adjustments Trailer mode: Carrying children in the Kidgoo when cycling. have been made for the particular mode. Please follow »...
UTILISATION Securing the wheel (Jogger mode) Securing the load In jogger mode, the wheel must not be at an angle to the direction of Loading the baggage travel. You must lock the wheel to run straight ahead in order to prevent abrupt blocking.
UTILISATION Embarking the children Tip! Preparing the cabin A balanced load distribution is particularly important in Apply the parking brake to secure the Kidgoo in order to prevent it » trailer mode. If the two children differ greatly in terms of from rolling away.
UTILISATION When adjusting the belt length, make sure that you only pull on the » belt straps themselves and not on the shoulder padding, as these Danger! are fixed to the seats backrest. Before every journey, check that the safety harnesses Insert the tabs into the belt buckle until they click audibly.
UTILISATION Checking the tow bar load Total weight too heavy Use a bathroom scale, for example, to measure the tow bar load: Reduce the baggage weight in the pouch for small items. » Reduce the baggage weight in the storage space. »...
UTILISATION Remove the cotter pin from the tow bar head. » Decoupling the trailer Push the tow bar onto the coupler of the bicycle so that the cotter pin » holes in the coupler and tow bar head are one above the other. Loosen the safety strap and wrap it around the tow bar.
UTILISATION Using the sun screen The sun screen is housed in the canopy between the insect net and the splash water window. The length can be adjusted with Velcro fasteners. Closing the weather canopy: Open the top toggle fasteners and unroll the weather canopy over »...
UTILISATION Using the ventilation windows The purpose of the ventilation windows of the Kidgoo is to improve air circulation in the cabin. Lateral ventilation windows: To open, release the Velcro fastener of the window film in the cabin » and fold it down. To close, secure the window film with the Velcro fastener again.
Page 34
UTILISATION In order to take up less space, you can also fold in the push handle » and remove the wheels. In the lowest position, the push handle also serves as a transport » lock for the cabin preventing it from folding open. Caution! Only fold up the cabin after it has been cleaned both inside and outside and is completely dry.
CARE AND MAINTENANCE Excessive weather influences such as UV radiation, temperature » Caution! fluctuations, moisture, contact with salt (sea water, salty air, road salt). Please note that textiles or fabric parts must always be Unfavourable storing conditions (shortage of space, variations in »...
CARE AND MAINTENANCE wrist in order to prevent accidental rolling away. Maintenance intervals Check whether the tow bar, coupler and buggy wheel and their » attachments are technically OK. Caution! Check the condition of the wheels. Replace covers and hoses in »...
Page 37
APPENDIX External dimensions Kidgoo1 Kidgoo2 Wheels Kidgoo1 and Kidgoo2 Length (Trailer mode) 155 cm 155 cm Wheel Type 20" spoked wheel, push-in axle Width (external width from wheel 67 cm 67 cm to wheel) Tyres 20 x 1,75 (47-406) Height (from ground to cabin roof) 95 cm 95 cm Hose size...
APPENDIX Spare parts Locking button tow Rubber cap 20" Adjustment leaf Leaf spring long Leaf spring short LED back light bar mount 2020 Wheel 2020 suspension petrol 166x25 127x25 2020 Art.-No.: Z-VKDA-20 Art.-No.: Z-GUKA20-20 Art.-No.: EBP-SET Art.-No.: Y-BFL166x25 Art.-No.: Y-BFK127x25 Art.-No.: Y-LBRL-20 (Kidgoo1) (Kidgoo1)
Page 40
APPENDIX Spare parts Belt pad set 2020 Belt pad left 2020 Belt pad right 2020 Crotch pad 2020 Head rest Harness catch Art.-No.: GP-20-SET Art.-No.: Z-GPL-20 Art.-No.: Z-GPR-20 Art.-No.: Z-SCHPO-20 Art.-No.: KS-20 Art.-No.: GUR-69 Reflector white Reflector red 2019 20“ hose Hub axle with Plug connection Pennant holder,...
2020 Art.-No.: Z-BASM-20 Art.-No.: Z-DKMW-20 Art.-No.: Z-HSHG-19 Art.-No.: Z-KPL-19 Art.-No.: Z-KPR-19 Art.-No.: Z-GDA-20 Qeridoo GmbH Industriepark Nord 100 Hotline 53567 Buchholz Support information Germany +49 (0) 2683 9466577 Please contact us directly if you have any questions about our products.