QERIDOO Kidgoo1 2018 User Manual

QERIDOO Kidgoo1 2018 User Manual

Bike trailer
Hide thumbs Also See for Kidgoo1 2018:

Advertisement

Quick Links

User manual
EN
Kidgoo1 2018
Kidgoo2 2018
This product fulfils all safety requirements of the
European standard for bicycles and bicycle trailers
(DIN EN 15918).

Advertisement

Table of Contents
loading

Summary of Contents for QERIDOO Kidgoo1 2018

  • Page 1 User manual Kidgoo1 2018 Kidgoo2 2018 This product fulfils all safety requirements of the European standard for bicycles and bicycle trailers (DIN EN 15918).
  • Page 2: Table Of Contents

    Defensive riding Storage special notification. Product overview Care and maintenance This documentation can be ordered from Qeridoo GmbH in other languages, or is available for Scope of delivery Care download on our website if already available. Components and control elements...
  • Page 3: Performance Limits

    Introduction Introduction Proper use The following additional restrictions apply to Trailer mode: Kidgoo was designed as a bicycle trailer and comes with an additional buggy and walker func- Requirements for the tow bar Kidgoo1 & Kidgoo2 tion. For Trailer mode, use a tow bar with coupler to connect the trailer to a suitable towing vehicle 3 – 8 kg Permissible tow bar load range (bicycle or motorised pedelec with a maximum speed of 25 km/h).
  • Page 4: Safety Instructions

    Install and use only original accessories and spare parts manufactured or recommended by visibility. Qeridoo. Using other products relieves the manufacturer of liability. ƒ Before every journey, close the inner part of the 3-in-1 canopy so that the integrated insect ƒ...
  • Page 5: Cycling With A Trailer

    Safety instructions Product overview Cycling with a trailer Scope of delivery The way in which the bicycle moves changes significantly when it is pulling a trailer, and this is par- ticularly noticeable when braking and cornering. With regard to this, pay attention to the following: ƒ...
  • Page 6: Components And Control Elements

    Product overview Product overview Components and control elements Components and control elements Side view Rear view 1 Cabin (frame made from aluminium tubes 9 Removeable wheel guard for rejection from 1 Pushbutton for adjusting the height of the 8 Storage space with inside pocket, obstacles with weatherproof fabric cover) push handle (both sides)
  • Page 7: Assembly

    Assembly Assembly Below you can read all the information that you will need to assemble your Kidgoo properly. Put the four screws through the leaf spring plates into the leaf spring retainer and tighten them. Make sure that you have sufficient space to assemble it. Also pay attention to the door width at the place of installation: The Kidgoo1 is 72 cm wide with...
  • Page 8: Cover

    Assembly Assembly Installing the head protectors (Kidgoo2) Inserting the wheels The head protector serves as additional side protection when transporting two children. Lift the cabin a little bit in order to install the wheel Be sure that the slide covers for the head protectors are fixed and tightened on both sides. easier.
  • Page 9: Inserting The Pennant

    Assembly Assembly Inserting the pennant Mounting the tow bar You only require the tow bar in Trailer mode. It is used to hook up the Kidgoo behind a bicycle equip- Danger! „Connecting the trailer to a bicycle“ on page 26. ped with a suitable coupler, see The pennant must always be mounted in Trailer mode.
  • Page 10: Mounting The Coupler Onto A Bicycle

    If it does not fit your bicycle, find a suitable adapter and special couplers in our manuals example an assembly stand, or turn the bicycle upside down so that you can place it on on the following website: www.qeridoo.de/kupplungsleitfaden its saddle and handlebars. Caution! In the as-delivered state, the supplied coupler is connected to the tow bar: Do not use a tool that has previously been in contact with conventional steel.
  • Page 11: Utilisation

    Utilisation Utilisation Setting the mode Below you will find all the information for adapting the Kidgoo to the required modes and to allow you to use all the convenience functions. You can use the Kidgoo in one of the following modes: Trailer mode: Carrying children in the ƒ...
  • Page 12: Insert Tow Bar

    Utilisation Utilisation Tip! Danger! Carry the buggy wheel e.g. in the storage space in order to allow you to use the Kidgoo Loose objects and objects with sharp edges should only be stored in the sewn-in inner flexibly at your destination. Instructions for re-mounting it can be found in the chapter pouch in the storage space to avoid them damaging the cover or injuring the child..
  • Page 13: Embarking The Children

    Utilisation Utilisation Strapping in children Put the harness catch, including the pad, onto the centre harness on the front of the seat. Use the harness catch of the left or right seat to do this. Repeat this procedure in reverse order whenever you require the safety harnesses for carrying two children.
  • Page 14: Connecting The Trailer To A Bicycle

    Utilisation Utilisation Checking the tow bar load Guide the tow bar’s retaining strap through the braces of the rear wheel so that the trailer is securely connected to the bicycle frame. Use bathroom scales, for example, to measure the tow bar load: Hook the retaining strap with the carabiner hook into the eye on the tow bar.
  • Page 15: Using Backrest Cushion

    Utilisation Utilisation Storage Danger! Never ride with the cover open. As a minimum, the insect net must be closed in order For storage, simply fold the Kidgoo together and store it in a protected and dry place without direct to provide protection against stones. In case of bad weather, dirty ground or in dense „Care“...
  • Page 16: Care And Maintenance

    At higher storage temperatures, you should store the wheels separately from the cabin because the tyres’ rubber can cause odours. ƒ Use a Qeridoo folding garage if the Kidgoo must be kept outdoors. 30 – 06|2018 – Subject to change.
  • Page 17: Appendix

    Appendix Appendix Technical data Warranty terms Qeridoo provides a two-year warranty commencing on the purchase date for plastic and External dimensions Kidgoo1 Kidgoo2 cover parts, as well as for load-bearing components. This warranty covers only material and 151 cm 151 cm manufacturing faults arising on correctly used and maintained vehicles. In particular, the...
  • Page 18: Spare Parts

    Appendix Appendix Spare parts Other spare parts Locking button tow bar mount Belt padding from 2018 (valid from 2018) from 2018 GPMK-18-SET Art.-Nr.: Z-VKDA-18 Art.-Nr.: Brake pedal plastic V2 from 2018 Crotch padding from 2017 Y-BPV2-18 Z-SCHPO-17 Art.-Nr.: Art.-Nr.: Air suspension Kidgoo Head rest from 2017 Y-KS-17 from 2018...
  • Page 19 Kidgoo 2018 Qeridoo GmbH Industriepark Nord 100 53567 Buchholz Germany www.qeridoo.de info@qeridoo.de...

This manual is also suitable for:

Kidgoo2 2018

Table of Contents