Related Manuals for QERIDOO Speedkid2 Q200-L
Summary of Contents for QERIDOO Speedkid2 Q200-L
- Page 1 User manual Speedkid2 – Q200-L This product fulfils all safety requirements of the European standard for bicycles and bicycle trailers (DIN EN 15918).
-
Page 2: Table Of Contents
Fitting the wheel guard Before every ride Mounting the push handle This documentation can be ordered from Qeridoo GmbH in other languages, or is available for download on our website if already available. Tightening the backrest and cover Monthly (or every 200 km) Visit us at: www.qeridoo.com... -
Page 3: Introduction
Introduction Introduction Proper use The following additional restrictions apply to Trailer mode: was designed as a bicycle trailer and comes with an additional buggy and walker Requirements for the tow bar Speedkid2 function. For Trailer mode, use a tow bar with coupler to connect the trailer to a suitable towing Permissible tow bar load range (on the coupler pocket) 3 –... -
Page 4: Safety Instructions
“Care and maintenance” on page fulfilled. In particular, pay attention to the table and the instructions in the chapter “Setting Use only original accessories and spare parts manufactured or recommended by Qeridoo. the mode” on page ƒ Using other products relieves the manufacturer of liability. -
Page 5: Cycling With A Trailer
Safety instructions Product overview Cycling with a trailer Scope of delivery The way in which the bicycle moves changes significantly when it is pulling a trailer, and this is particularly noticeable when braking and cornering. With regard to this, pay attention to the following: Practice cycling with the trailer before going out onto the road. -
Page 6: Components And Control Elements
Product overview Product overview Components and control elements Components and control elements Side view Rear view Cabin (frame made from aluminium tubes Tow bar for Trailer mode with coupler Star grip screw with tube clamp for Storage space under the push handle with weatherproof fabric cover) pocket and cotter pin fastening, plus securing the push handle... -
Page 7: Accessories
The tube clamps are preset so that the connection can be made slightly above the rear side windows: You can find our current list of dealers on the Internet at: http://dealerlocator.qeridoo.de 12 – 02|2017 – Subject to change. Subject to change. – 02|2017 – 13... -
Page 8: Inserting The Wheels
Assembly Assembly Fitting the wheel guard Hold one end of the stabiliser rod on the rear roof support so that the tube clamp touches it close to the The wheel guard on both sides of the cabin prevents the wheels from getting stuck on pillars or upper bend of the tube. -
Page 9: Tightening The Backrest And Cover
Assembly Assembly Inserting the pennant Attach the tube clamps in turn onto the cabin frame tubes by applying gentle pressure. Secure them by Danger! partly tightening the star grip screws. The pennant must always be mounted in Trailer mode. Otherwise the very low Align the push handle horizontally by pushing the tube clamps all the way up at the same height. -
Page 10: Mounting The Coupler Onto A Bicycle
Assembly Assembly Push the front button on the tow bar so that the Mount the coupler on the rear wheel axle: locking bolt unlocks. Place the large hole of the coupler onto the left – Keep on pushing down the button and push the tow side of the rear wheel axle so that the coupler is bar forwards until the mark in the tow bar mount is facing outwards. -
Page 11: Utilisation
Utilisation Utilisation Setting the mode Below you will find all the information for adapting the to the required modes and to Speedkid2 allow you to use all the convenience functions. You can use the in one of the following modes: Speedkid2 Trailer mode: Carrying children in the when cycling... -
Page 12: Using The Pennant
Utilisation Utilisation Securing the load Setting the wheel so that it turns freely (Buggy mode) It must be possible for the wheel to move freely through 360° in order to manoeuvre in Buggy mode. Loading the baggage Push up the red mode switch to release the wheel. Loading the storage space Securing the wheel (Walker mode) Undo the Velcro fasteners of the storage space cover and lift it. -
Page 13: Embarking The Children
Utilisation Utilisation Reconnect a harness catch complete with the pad Help the child to put his/her arms through the two side parts of the 5-point safety harness. and buckle into the middle harness, which is secured Adjust the safety harness, the harness pad and the head rest to the size of the child. under the bench seat. -
Page 14: Connecting The Trailer To A Bicycle
Utilisation Utilisation Changing the towbar load Danger! Adjust the tow bar load by moving or reducing your baggage: Always secure the tow bar to the bicycle frame with the retaining strap. This ensures that the trailer will remain connected even if the tow bar becomes detached from the Tow bar load over 8 kg: coupler. -
Page 15: Adjusting The Suspension
Utilisation Utilisation Storage Closing the ventilation window: Release the top Velcro fastener to release the cover. To store the , simply fold it up and keep it in a protected location. Pay attention also to Speedkid2 Close the cover with the bottom Velcro fastener. the instructions in the chapter “Care”... -
Page 16: Care And Maintenance
At higher storage temperatures, you should store the wheels separately from the cabin ƒ because the tyres’ rubber can cause odours. Every three years (or every 3000 km) Use a Qeridoo folding garage if the must be kept outdoors, see “Accessories” on ƒ... -
Page 17: Appendix
Length (with tow bar) 150 cm Under no circumstances shall Qeridoo be liable for material damage or injury attributable to Width (external width from wheel to wheel) 85 cm improper assembly, the intentional alteration of components or the non-observance of warning... -
Page 18: Spare Parts
Appendix Appendix Spare parts Other spare parts (valid from 2017) 8.5" buggy wheel, complete Light reflector, white (with wheel suspension and Art. no.: LRF-Weiss quick-release clamp) BG-555K Art. no.: Light reflector, red Connecting piece (buggy wheel) LRF-ROT Art. no.: Art. no.: BG-UN-5 Light reflector, yellow Disk for quick-release clamp... - Page 19 Speedkid2 – Q200A Qeridoo GmbH Reutherstraße 3, 53773 Hennef (Sieg) Germany www.qeridoo.com info@qeridoo.com...