Troubleshooting Table; Specifications - Orion TV20RN10D Operating Instructions Manual

Troubleshooting table

Please check the following list before requesting service.
Symptom
No picture, no sound
No reception
The TV switches off with
missing antenna input
signal
In menu, the
TUNING option cannot be
selected.
Wrong Colours
While viewing a DVB
(digital) channel, there is
sound but no picture.
Blocky image or image
stops intermittently.
Some digital channels
cannot be viewed.
"Database empty" message
appears on the screen.
• The LCD panel is a very high technology product, giving you fine picture details. Occasionally, a few nonactive pixels
may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance
of your product.

Specifications

System
Video Colour System
Preset channels:
Frequency Range
Power Supply
Power Consumption: Operation: approx. 73W at 230V, 50Hz
LCD
Output Power
Surrounding temperature
Operating Humidity
Dimensions
Weight (w/o Accessories)
Accessories
Weight and dimensions are approximate. Because we continually strive to improve our products we may
change specifications and designs without prior notice.
32W0346A_ENG.indd 47 32W0346A_ENG.indd 47
Troubleshooting table/Specifications
Switch on the set.
Check that the mains power outlet is properly connected.
Select appropriate input mode.
Have you tuned in the TV stations?
Press 1 on the remote control.
Connect the antenna.
Make sure the set is ON and not in Standby mode
This is normal.
15 minutes after the antenna signal has disappeared, the set
will change to standby mode.
The unit is set to AV mode. Press 1 on the remote control.
Colour and Brightness errors can occur when the viewing
angle / ambient air temperature (see technical specifications)
are exceeded.
Some channel offers audio content only. It is normal.
Check all antenna connections.
Move the antenna away from areas of possible interference.
Try using an antenna booster.
Contact the service provider to subscribe.
Check all antenna connections and try auto tuning again.
Analogue:
Digital:
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
Analogue channels (99) + Digital channels (Carrier 200/Service1000)
Analogue: IreE2~E4, X~Z+2, S1~S10, E5~E12, S11~S41, E21~E69
Digital: E5~E12, ItaE~G, F1~F6, Rus6~12, E21~E69
AC 220-240V, 50/60Hz
Stand by: approx. 1W at 230V, 50Hz
20.1" TYPE (51 cm visible)
TFT low-glass Active Matrix Colour LCD, 640 x 480 Pixel
approx. 1.5W (MAX) x 2
Operation: 5°C ~ 40°C/Storage: –20°C ~ 60°C
Less than 80%RH
47.8(W) x 46.3(H) x 21.1(D) cm
approx. 8.4 kg
2 batteries (AA/R6/UM-3)/Remote control unit/AC cord
Possible solution
PAL UK, IR, CCIR, FRENCH System, B/G, D/K, I/I, L
DVB-T (OFDM 2k/8k 16QAM/64QAM)
Page
10
12, 44,45
10
10
17
13
10
29
47
5/28/07 9:40:34 AM 5/28/07 9:40:34 AM