Manual Scan - Orion TV20RN10D Operating Instructions Manual

Manual Scan

With the Manual Scan option, you
can tune one carrier at a time, by
entering the carrier parameters
manually.
Notes:
• If on the 'AUTO INSTALLATION
(COUNTRY)' screen 'FINLAND' is
selected, 'Frequency (kHz)' cannot
be used.
• When the Country is set
to FINLAND in the 'AUTO
INSTALLATION (COUNTRY)'
If there is a Channel List in the data
after AUTO Scan or MANUAL Scan,
Channel Type Selection Menu will
be displayed and available to set
Channel List Type.
Select the Channel List Type by
pressing /
28
32W0146A_ENG.indd 28 32W0146A_ENG.indd 28
1
2
3
4
5
6
and press ENTER.
Press DIGITAL MENU, the menu will appear on the screen.
Press or to select Installation option.
Press or to select 'Manual Scan' from the sub menu
tab, then press ENTER.
M a n i
A C A C
B B
You can choose the carrier number from the Channel list by
using or and the corresponding frequency set for the
carrier will be set for tuning.
Manual Scan
Otherwise you can also directly enter the frequency value to
start the tuning.
Manual Scan
After setting the carrier, press ENTER to start the scanning.
During the scan process, the list of services (TV/Radio)
collected for the carrier will be listed.
On completion, 'Scan completed' message will be shown.
Then the confirmation banner will be displayed.
Press or to select 'Yes' or 'No', then press ENTER
(the selected option is shown in blue).
Press EXIT to return to the normal screen.
m e n u n I s a t l l
Auto Scan
Manual Scan
Carrier Setup
Navigate
0..9 Enter
Navigate
0..9 Enter
Information
Scan Completed
t a o i n
Exit
Exit
6/6/07 10:54:01 AM 6/6/07 10:54:01 AM