Display Setup - Orion TV20RN10D Operating Instructions Manual

Display Setup

This feature allows you to change the Display Setup settings as per your preference. In this menu
the following options are available.
Banner timeout:
This option changes the banner timeout period (how long the OSD information stays on the screen in the
digital mode). You can select a banner timeout of between 1 - 7 seconds. 4 is the default value.
Banner position:
This option is to set the position of the Display Setup menus. The banner will be positioned depending upon
the option set in this menu. Two options, top & bottom are supported. Depending upon the option set by you
the banner will be positioned.
Display transparency:
This option is to set the transparency ratio of the Display menus. The Display transparency setting can be
altered between "None" (no transparency) to 50%. The default transparency level will be set to 10%.
36
32W0346A_ENG.indd 36 32W0346A_ENG.indd 36
1
Press DIGITAL MENU, the menu will appear on the screen.
Press or to select System Configuration option.
Press or to select 'Display Setup' from sub menu
tab, then press ENTER.
2
Display Setup menu will appear.
Press or to select the item you want to change (see
the left note for details of each setting).
Then you can change each setting by pressing
3
After all the changes are made, press EXIT to return to the
normal screen.
Main menu System Configuration
A C A C
B B
Display Setup
Password Setup
or
Display Setup
Navigate
Enter
.
Exit
5/28/07 9:40:29 AM 5/28/07 9:40:29 AM