Common Interface - Orion TV20RN10D Operating Instructions Manual

You can access the Common
Interface module information from
this menu option.
32W0146A_ENG.indd 39 32W0146A_ENG.indd 39

Common Interface

Preparations
Insert CAM into the DVB Common Interface slot on the backside
of the TV (see page 10).
1
Press DIGITAL MENU, the menu will appear on the screen.
Press or to select Common Interface option, then
press ENTER.
2
The CAM module name will be displayed. You have to press
ENTER to view further information.
3
In the CI Menu, CAM specific information such as Module
information, Smart card information, Language and
Software Download are shown.
Press or to select information, then press
ENTER to see detail.
4
Press EXIT to return to the normal screen.
Note:
If you remove the CAM module in the digital TV mode then 'CAM
module has been removed' will be shown on the screen.
If you enter into the Common Interface menu when the CAM is
not inserted then 'No CAM Found' will be displayed.
M a n i m e n u C o m m o
A C A C
B B
Cl Module
Enter Exit
Cl Menu
Main menu
Module information
Smart card information
Language
Software Download
Press Ok to select, or Exit to quit
Navigate
n I t n r e a f c e
39
6/8/07 11:03:37 AM 6/8/07 11:03:37 AM