Version; Software Upgrade - Orion TV20RN10D Operating Instructions Manual

Version/Software Upgrade
Notes:
• During the Software Updating
process, do not turn off the unit. At
this time you cannot use any of the
buttons, apart from
• After the Software Updating process,
the Digital Menu memory settings
will be lost, so it is necessary to go
through the setting up procedures
again.
38
32W0146A_ENG.indd 38 32W0146A_ENG.indd 38

Version

You can check the software and hardware versions.
1
Press DIGITAL MENU, the menu will appear on the screen.
Press
or
ENTER.
Version information banner will appear.
2
This banner provides the below informations:
• Hardware Version
• Software Version

Software Upgrade

Software Upgrade allows you to download the latest software
available on the Engineering channel.
1
Press DIGITAL MENU, the menu will appear on the screen.
Press
or
then press ENTER.
2
If a software upgrade is available from an Over- Air-
Download (OAD) then the message 'S/W available, do you
want to download?' will be displayed - you can then select
'Yes' or 'No' by pressing
selected option is shown in blue).
3
If you select the option 'Yes' then the Software Upgrade
process will be initiated. It will take about 20 minutes and
after this process is complete, the TV will be rebooted
automatically.
If you select the option 'No' you can continue to watch TV
(STANDBY).
programmes as before.
or to select Technical Information option. Press
to select 'Version' from sub menu tab, then press
Main menu
A C A C
B B
Version
Enter
or to select Technical Information option. Press
to select 'Software upgrade' from sub menu tab,
Main menu
A C A C
B B
or , then press ENTER (the
Confirmation
S/W available, do you want to download?
Yes
Technical Information
Version
Software upgrade
Exit
Technical Information
Version
Software upgrade
No
6/11/07 10:35:01 AM 6/11/07 10:35:01 AM