Dnr; Blue Back; Rec Screen Status (Lcd Power On/Off) - Orion TV20RN10D Operating Instructions Manual

DNR/Blue back/Rec screen status (LCD Power on/off)
22
32W0346A_ENG.indd 22 32W0346A_ENG.indd 22

DNR

Sometimes it is not possible to input a high-quality TV signal.
The actually inputted signal is noisy, e.g. a noisy, analogue cable
TV signal. DNR can somewhat improve any interference caused
by the faulty input signal.
1
Select DNR, then press ENTER.
Then press or to select OFF,
LOW, MEDIUM or HIGH.
2
Repeat step 1 to set other values, or press EXIT to return to
the normal screen.
The interferences from the imput are suppressed most if
HIGH is set. This could result in side-effects such as loss of
sharpness and smearing.

Blue back

You can set the TV to automatically change to a blue screen and
mute the sound if the signal is weak or absent.
1
Select BLUE BACK, then press
ENTER.
Then press or to select ON
or OFF.
2
Press EXIT to return to the normal screen.

Rec screen status (LCD Power on/off)

This function is used in conjunction with the Timer function that
is included as part of the Digital EPG. It determines whether the
TV screen switches on or not when a programmed Timer setting
begins - see page 45 for further details.
1
Select REC SCREEN STATUS, then
press ENTER.
Press or to select ON or OFF,
then press ENTER.
2
Press EXIT to return to the normal screen.
DNR OFF
COLOUR TEMPERATURE
MEDIUM
BLUE BACK OFF
RESET
OFF
DNR
OFF
DNR OFF
COLOUR TEMPERATURE
MEDIUM
BLUE BACK OFF
RESET
OFF
REC SCREEN STATUS
OFF
OFF
5/28/07 9:40:22 AM 5/28/07 9:40:22 AM