Troubleshooting Table; Specifications - Orion TV32LB2000(H) Operating Instructions Manual

Troubleshooting table

Please check the following list before requesting service.
Symptom
No picture, no sound.
No reception with built-in
tuner.
The TV switches off with
missing antenna input signal
Channel menu cannot be selected. The unit is set to AV mode. Press 1 on the remote control.
Wrong Colours
SCART-picture shifted to side,
incorrect colors.
While viewing a DVB (digital)
channel, there is sound but no
picture.
Blocky image or image stops
intermittently.
Some digital channels cannot
be viewed.
No colour or picture black.
REC-button does not function. This button is not effective to this product.
• The LCD panel is a very high technology product, giving you fine picture details. Occasionally, a few nonactive pixels may appear
on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.

Specifications

System
Video Colour System
Preset channels
Frequency Range
Power Supply
Power Consumption Operation: 75W at AC230V, 50Hz
(approx.)
Standby:
with Mains switch off:
LCD
HDMI input
Output Power (approx.)
Surrounding temperature
Operating Humidity
Dimensions (W) x (H) x (D)
Weight (w/o Accessories)
Accessories
Weight and dimensions are approximate. Because we continually strive to improve our products we may change
specifications and designs without prior notice.
3DH0114B_EN.indd 27 3DH0114B_EN.indd 27
Possible solution
Switch on the set.
Check that the mains power outlet is properly connected.
Select appropriate input mode.
Unplug unit for 1 minute, then plug it back in.
Do not connect scart cable at first. Select input ATV or DTV. On
the remote control press the 1-key once and release.
Connect the antenna.
Try another antenna.
This is normal.
15 minutes after the antenna signal has disappeared, the set will
change to standby mode.
Colour and Brightness errors can occur when the viewing angle/
ambient air temperature (see technical specifications) are exceeded.
Inside player's menu set the video-output to RGB.
Some channel offers audio content only. It is normal.
Check all antenna connections.
Move the antenna away from areas of possible interference.
Try using an antenna booster.
Contact the service provider to subscribe.
AV1 input set to Auto.
TV32...
Analogue: PAL (B/G, D/K, I/I), SECAM(B/G, D/K), SECAM(L)
Digital: DVB-T, DVB-T HD(H.264), DVB-C, DVB-C HD(H.264)
PAL/SECAM/NTSC 3.58
2000 Service in total of Analog and Digital
Analogue: 45.75~858MHz
Digital: E2~E69
AC 220-240V, 50Hz
135W at AC230V, 50Hz
0.45W at AC230V, 50Hz
0W
80 cm visible 107 cm visible
TFT low-glass Active Matrix Colour LCD, 1920 x 1080 Pixel
HDMI compliant (type A connector), HDCP compliant
Suggested scan rates: 50Hz: 576i/576p/720p/1080i/1080p
60Hz: 480i/480p/720p/1080i/1080p
24Hz: 1080p
HDMI Audio: 2-channel PCM, 32/44.1/48 kHz sampling frequency
16/20/24 bits per sample
10W (MAX) x 2 10W x 2 +15W (MAX)
Operation: 5°C ~ 40°C/Storage: –20°C ~ 60°C
Less than 80%RH
79 x 55 x 18 cm 102 x 68 x 26 cm
approx. 8.4 kg approx. 15.8 kg
2 batteries (AAA/R3/UM-4)/Remote control unit/Stand/Screws for stand (TV32...: x
5/TV42.../TV46...: x 4)
TV42... TV46...
151W at AC230V, 50Hz
117 cm visible
112 x 75 x 26 cm
approx. 18 kg
Page
7
12
12
10
10
13
12
10
21
27
5/12/11 9:45:57 AM 5/12/11 9:45:57 AM