Direct Call (Baby Call) - VTech VT6221 User Manual

Telephone settings

Direct call (baby call)

With direct call, you can program a number which can be directly dialled when any key
(except the programming key) is pressed.
Entering/editing the direct call number
PROGRAM
Press the programming key.
Press 3.
Z
Enter your four-digit PIN.
PROGRAM
Press the programming key.
If the Direct call number has been programmed, this number
is displayed. Delete individual digits backwar d s by pr essing
the
CLEAR
can add a dialling pause between two digits by holding down the «0» key.
Z
Enter the number which is to act as the direct call number.
PROGRAM
Press the programming key to save the setting.
Activating/deactivating direct call
PROGRAM
Press the programming key.
Press 2.
Z
Enter your four-digit PIN.
PROGRAM
Press the programming key.
If direct call was deactivated, this activates it. If direct call was activated, this
deactivates it.
PROGRAM
Press the programming key to save the setting.
If direct call is activated, the direct call number is displayed in the handset.
key. Hold down the key to delete the entire number. You
CLEAR
22