Basic Operation; Telephone Operation; Handset Operation - VTech t2340 User Manual

Telephone Operation

Handset Operation

. Make a Call
Press before or after dialing number to place a call
2.
Flash/Call Waiting
Press to begin a call, then dial a number During a call,
press to receive an incoming call, if call waiting is activated
. Chan
While on a call, press CHAN to switch to a clearer channel
. Delete
Press to delete one or all calls in the call log See page 20
for complete instructions
. Answer a Call (any key)
Press any key (except OFF) to answer a call
. Handset Volume
Adjust the volume while on a call A double beep will sound
when you reach the maximum or minimum setting
CID and DIR keys
• When phone is not in use, press
information
• When phone is not in use, press
directory entries
. Select
Press to confirm the highlighted option while in programming mode.
. Off
During a call, press to hang up While in programming mode, press to cancel an operation, back up, or exit
. Redial/Pause
Press to view redial memory While entering numbers, press and hold to insert a dialing pause
0. PROG
Press to enter programming mode
1,2
5
3,4
/CID to display caller ID
/DIR to display
www.vtechphones.com
6
7
8
10
9

BASIC OPERATION