VTech t2340 User Manual page 25

Troubleshooting
Problem Suggestion
CAN'T CONNECT
• Only one handset of your phone system can be in use (off hook) at a time For example, if
displays on my
handset
• Move the handset closer to the base You might have moved out of range
• Reset the base Unplug the unit's electrical power Wait for 15 seconds then plug it back in
• Other electronic products can cause interference with your cordless phone Try installing your
• You are trying to use both system handsets at the same time Be sure to only use one system
The batteries will not • Make sure the battery is plugged into the handset
hold a charge • Be sure to use the AC power adaptor provided with your phone
• Charge the battery in the handset at least 16 hours For optimum daily performance, return the
• You may need to purchase a new battery, please refer to the Batteries section of this user's
• Your phone might be malfunctioning Please refer to the Warranty section of this user's
HS1 is on a call and HS2 presses TALK, CAN'T CONNECT will display Be sure only one
handset is in use at a time
Allow up to one minute for the handset and base to reset
phone as far away from these types of electronic devices as possible: wireless routers, radios,
radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal
computers, kitchen appliances and other cordless phones
handset at a time
handset to its base when not in use
manual
manual for further instruction
www.vtechphones.com ADDITIONAL INFO 2