Charge The Handset Battery; Language; Set Handset Date And Time - VTech T2326 User Manual

Installation
2. Mount the base unit on the wall. Position the base unit so the �ounting stu��s fit into the
• If you are not
going to use the

Charge the handset battery

telephone for a
Place the handset in the base unit .
long period of
battery for at least 16 hours before using your telephone .
time, remove the
battery to prevent

Language

possible leakage .
• If you have
•
any trouble
•
installing your
telephone, please
•
refer to the
Troubleshooting

Set handset date and time

section on pages
I� ��ou subsc�ibe to calle� ID se��ice, the ��ate an�� ti�e will be set auto�aticall�� with the fi�st inco�ing
25-31 of this
call . If you do not have caller ID service, you can set the date and time manually:
manual .
•
•
•
•

holes on the wall mount bracket . Slide the base unit down on the mounting studs until
it locks into place .
base unit . . CHARGING... will display on handset . Be sure to charge the
Press PROG, then press
The current setting blinks . Press
language is blinking on the screen .
Press SELECT to save .
Press PROG, then press
When the month is blinking, press
SELECT .
When the day is blinking, press When the day is blinking, press day is blinking, press blinking, press
When the hour is blinking, press When the hour is blinking, press hour is blinking, press blinking, press
SELECT.
www.vtechphones.com
base unit so the �ounting stu��s fit into the
base unit down on the mounting studs until
once and LANGUAGE is displayed . Press SELECT.
or to toggle between English and Spanish until the desired
until DATE/TIME is displayed . Press SELECT.
or until the screen displays the correct month . Press
or until the screen displays the correct day . Press SELECT.
or until the screen displays the correct hour . Press
so the �ounting stu��s fit into the
down on the mounting studs until