Charge Handset Battery - VTech IP8300 Manual

Hide thumbs Also See for IP8300:
Table of Contents

Advertisement

Installation and configuration

Charge handset battery

After battery installation, there may be enough power for short calls. For optimal performance, we
recommend that you place the handset in the charger and allow the battery to charge for 16 hours
before use. The Charge light on the handset charger will illuminate to indicate that the handset is
When the battery power is completely depleted, a full recharge takes about 16 hours. If the handset
will not be used for a long period, remove the battery to prevent possible leakage.
Operation
While in use (talking)
CAUTION:
1. Use only the battery(ies) provided or their equivalent.
3. Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns
11
A new battery is installed in the handset.
The battery indicator on the handset display is empty.
codes for special disposal instructions.
or injury to the eyes or skin. The electrolyte may be toxic if swallowed.
www.vtechphones.com
Operating time
2 hours
96 hours (4 days)

Advertisement

Table of Contents
loading

Table of Contents