Registration; Register A Handset - VTech MI6889 User Manual

Registration

The mi6889 comes with four registered handset (named Handset 1, 2, 3, 4).
Additional handsets (mi6807) are available from your local authorized dealers or from our website
at www.vtechphones.com in the US, or www.vtechcanada.com in Canada.
• When first
purchased you
Up to four extension handsets can be registered with the same telephone base, and two can be in
need to charge
operation at the same time. Each additional handset purchased will have to be registered separately
your handsets
following the instruction which comes with the optional handset.
for at least five
minutes before
registering to

Register a handset

telephone base.
When first purchased, all accessory handsets show NOT REGISTERED
• The handset
on the screen. To register a handset:
number is used
1. Place the handset in a telephone base or charger that is connected
as the extension
to a power outlet. If PRESS FIND HNDST 4 SEC ON BASE does not
number.
appear on the screen after a few seconds, lift up handset and place
• If the registration
in base or charger again.
is not successful
lift all handsets
out of the
telephone base
. On the telephone base:
or charger and
• Press and hold
place them
• Release FIND HANDSET once the IN USE light comes on.
back in the
telephone base
or charger. Try
the registration
process again.
1
FIND HANDSET for four seconds.
Four
seconds later:
www.vtechphones.com
NOT REGISTERED
PRESS FIND HNDST
4 SEC ON BASE