Message Alert - VTech MI6889 User Manual

Answering system
Purpose
• Your phone may
Review announcement
not respond to
remote access
Record announcement
commands if
tones produced
by the telephone
are too short.
Hold the buttons Record memo
down longer if
this occurs.
Review remote access
• If accessing
code
from a touch
Change remote access
tone telephone,
press #5 to stop
code
recording.
Turn system off
Turn system on

Message alert

The message alert function produces an audio tone to remind you that there are new messages on
the answering system.
1. Press SETUP three times, the system announces "Message alert. To change the setting, press
CHANGE."
38
Press Action
#7
Listen to current outgoing announcement.
Pres s af ter hear ing t he bee p. Re c or d your new
announcement. Press 5 to stop recording. The system will
*7
play back the announcement for confirmation.
Press after hearing the beep. Speak after the system
announces "Record after the tone. Press STOP when you
8
are done." Start recording your memo. Press 5 to stop.
Listen to current remote access code.
#9
*9 Change remote access code.
When the system announces, "Answering machine off,"
0
press 0 again to turn the system back on.
When the system is off, it answers after 10 rings and
0
announces, "Please enter your remote access code." Enter
your remote access code.
www.vtechphones.com