Installation
Connect power to telephone base/handset chargers
1. Plug the power adapter into an electrical outlet not controlled by a wall switch, and the
• If the battery has
connector into the power jack on bottom of the t
not been charged,
. Choose the location for your charger, and plug its power supply into an electrical outlet.
place the handset
in the telephone
base, and allow
it to charge for at
Telephone outlet
least 16 hours.
• Use only the
VTech power
supply provided
with your
telephone.
To obtain a
replacement,
visit our website
at www.
vtechphones.com
or call 1 (800)
595-9511.
• This power unit
is intended to
be correctly
orientated in a
vertical or floor
mount position.
The prongs are
not designed
to hold the plug
in place if it is
Connect to phone line
plugged into a
Plug one end of the telephone line cord into the telephone line jack at the bottom of the telephone
ceiling, under-the-
table or cabinet
base. Then plug the other end of the cord into the wall telephone outlet.
outlet.
8
elephone base
www.vtechphones.com
.
AC power outlet
AC power outlet