Safety Information For Using Electrical Assemblies - Cornelius Energize Series Installation And Service Manual

1.5.2

Safety information for using electrical assemblies

DANGER!
To prevent risks to health and safety, please always observe the following five safety rules:
These five safety rules are to be applied before carrying out work on the electrical system and in the order stated
below. Once work is completed, the safety rules are to be undone again in reverse order.
• 1. Disconnect from power.
• 2. Secure against reconnection.
• 3. Check that the system is disconnected from power.
• 4. Ground and short-circuit the system.
• 5. Cover or separate adjacent live parts.
WARNING!
Risk of burns when touching hot parts of the unit!
Touching parts of the unit after it has been in continuous use over an extended period of time will result in a risk
of burns.
• Take appropriate safeguard measures, such as by wearing heat-resistant protective gloves.
DANGER!
Risk of poisoning and risk of explosion due to improper handling of CO
Risk of death from CO
• Observe all information on occupational safety for the safe operation of dispensing systems as applicable
in the relevant country of installation.
NOTICE!
• Make sure that the cable markers are not removed from the cables and/or mark or label the cables such
that they can be correctly assigned during installation.
ATTENTION!
Cables must be fixed in place using cable ties.
When fixing cables in place using cable ties, observe the following points:
• Once work on the unit is completed, return the area to the same state that you found it in.
• Using cable ties, combines cables in a meaningful way.
• When installing cables, be mindful of any bending radiuses that the manufacturer may have specified.
• To fix cables in place using cable ties, use the mounting bases provided.
Installation and service manual Undercounter cooler
Energize 3-5 (R134a)
4
!
2
Safety
cylinders!
2
Cornelius Deutschland GmbH
Document no. TD1005100
Version 08/10/2019, Index 3