Installing And Removing Sfp, Sfp+, And Qsfp+ Transceiver; Modules And Dac Cables; Verifying The Installation - H3C LSQM1TGS24QSA0 User Manual

Installing and removing SFP, SFP+, and
QSFP+ transceiver modules and DAC cables
For information about installing and removing SFP/SFP+ transceiver
modules and SFP+ DAC ca bles, see H3C SFP/SFP+/XFP
Transceiver Modules Installation Guide at www.h3c.com.
For information about installing and removing QSFP+ transceiver
modules and
Modules/Cables Installation Guide at www.h3c.com.

Verifying the installation

After the installation is complete, identify whether the interface card is
operating correctly.
If the interface c ard fails to oper ate correctly, perform the following
steps:
Reinstall it following the installation procedures described in this
1.
document.
If the problem persists, contact H3C Support.
2.
DAC cables, see H3C QSFP+ Transceiver
7