Battery Installation And Charging - VTech LS6125-2 User Manual

Getting started

Battery installation and charging

Install the battery as shown below. After nstallng the battery, you mght be able
to make and receve short calls. For best performance, charge the handset for at
least 16 hours before use. When the battery power s low, the handset wll beep,
LOW BATTERY wll be dsplayed and
the handset n the telephone base or charger to charge the battery when not n
use. See the table on page 49 for battery operatng tmes.
1. Insert the plug of the battery as ndcated. Make sure t s plugged securely
and matches the color-coded label nsde the battery compartment.
Place the battery wth the label THIS SIDE UP facng up and the wres nsde
2.
the battery compartment.
3. Align the battery compartment cover flat against the battery compartment,
then slde t upwards untl t clcks nto place.
4. Charge the handset by placng t n the telephone base or charger. The handset
charge lght wll be on when chargng.
1
will flash on the handset screen. Place
3
2
www.vtechphones.com
4
Charge lght
MENU
SELECT
VOL
CID
FLASH CLEAR
• If the handset
wll not be used
for a long tme,
dsconnect and
remove the battery
to prevent possble
leakage.
• To purchase
replacement
batteres, vst our
webste at www.
vtechphones.
com or call
1 (800) 595-9511.
In Canada, go to
www.vtechcanada.
com or call 1 (800)
267-7377.
3